How to Drain Water From a Flat Roof?

How to Drain Water From a Flat Roof | Roofing Contractors in Oregon

To maintain the durability of your roof, you need to know How to drain water from a flat roof. Flat roofs require a built-in drainage system to help remove moisture and debris, unlike other roofing styles that are tilted or sloping to allow water to flow automatically. Flat roofing problems can range from leaks to structural damage due to poor drainage. There are options for flat roofs that can help you understand How to drain water from a flat roof? We will go through them all one by one:

1. Install internal drainage

Most commercial buildings have internal drainage. Drainage pipes are hidden beneath the roof or behind the parapet wall to keep the space looking neat. This drainage system is typically installed at the roof’s center or where the slope is directed. These are best suited to large roofs.

Interior drains are not visually obstructive. Furthermore, they provide you with complete access to your roof. Because the pipe does not come into touch with the roof or parapet wall, this drainage type is the best if built properly. Even if a pipe leaks, the property is not harmed because the water is drained away.

2. Install Gutters

When it comes to flat roofs, gutters are the most popular drainage method. These marvels catch rainwater and divert it into a downspout, which conducts it away from the foundation, just like the gutters installed on sloped roofs. Inexpensive and universal, gutters are the easiest drainage system to find and install.

This device prevents water from spilling from the roof during heavy rains, safeguarding walls, entrances, and window openings.

3. The Slope

Flat roofs are meant to seem level but have enough slope to allow rainwater to flow freely into the guttering. A professionally installed flat roof should never have pools of water develop on top of it, and the surface should be even. If water remains on the roof for an extended amount of time, silt can build up, causing damage to the membrane if it freezes.

4. Fixing the Low Spots

While looking for How to drain water from a flat roof, you may never miss fixing your low spots. This is because Commercial flat roofs aren’t always fully flat, even though they’re termed that. The reason is the slight slopes in the roof’s surface that can occur as a result of the installation procedure, weak points in the roof, or a concentrated area of debris or precipitation.
Qualified contractors also know how to properly slope a flat roof for drainage. These slopes are designed to help with drainage so that water does not collect on your roof. It aids in the removal of excess water to the building’s perimeter, where an external drainage system resides, or to specified inside drains that will transport the water away.

However, one of the drawbacks of these low spots is the ease with which water ponds. When this happens, the drains might become clogged with dirt and stop working properly. This causes an accumulation of water, which can damage the roof’s membrane and eventually cause leaking. For services of drainage of water from water, roof feels free to contact at


Fox Roofing and Construction
21891 SE Ash St,
Gresham, OR 97030, US
(971) 563-1577

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *